4 Heads Automated Liquid Filling Machine Capacity
Applicable bottle height: 90-320mm (can be customized)
Applicable bottle diameter: ≥ 50mm
Number of machines: two, four, six, eight, ten or more (can be customized)
Machine model: 5-100ml 30-280ml 50-500ml 100-1000ml 500-2500ml 1000-5000ml
Machine size: 22000*1000*1850mm
4 Heads Automated Liquid Filling Machine Operation Guide:
a. Open the air valve switch and turn the selector switch to the manual position. At this time, the state of the machine is: the filling head is at the high position, the filling cylinder is at the origin position, the blocking claw is retracted, and the positioning claw is extended.
b. Turn on the conveyor power switch to operate it.
c. Adjust the magnetic switch on the filling cylinder. The magnetic switch is used to adjust the amount of filling. The magnetic switch 2 is used to adjust the starting point of the filling head to start rising.
d. The bottle on the conveyor belt moves to the bottom of the filling head, press the operation button, the machine will move in sequence: the filling head descends → infusion → the filling head rises. (The filling head starts to rise after the filling cylinder moves to the set positioning magnetic switch position) (the filling cylinder starts to retreat after the filling cylinder moves to the set quantitative magnetic switch position)
e. Press the stop button, (in the manual operation state, the stop button will be given the second function) the blocking claw is extended, the positioning claw is retracted, and after 3 seconds, the positioning claw is retracted, and the positioning claw is extended and then stopped.
f. Press the stop button again to repeat the above actions.